The Remington 700 rifle is a popular choice among hunters and sport shooters due to its accuracy, reliability, and versatility. This bolt-action rifle is well-known for its smooth operation, and taking the bolt out for cleaning or maintenance is a simple process that can be completed with just a few basic tools. This guide will provide step-by-step instructions on how to remove the bolt from a Remington 700 rifle safely and correctly.
Image: www.youtube.com
Step 1: Unload the Rifle and Make it Safe
Safety should always be the top priority when handling any firearm. Ensure that the rifle is unloaded and pointed in a safe direction. Engage the safety selector and open the bolt to verify that there is no ammunition in the chamber.
Step 2: Remove the Magazine (if Applicable)
If your Remington 700 has a detachable magazine, remove it by pressing the magazine release button and pulling the magazine straight down. If your rifle has an internal magazine, skip this step.
Step 3: Open the Bolt
With the rifle pointed in a safe direction, slowly pull the bolt rearward to the fully open position. Keep the bolt handle slightly elevated to prevent the bolt from closing accidentally.
Image: rifleshooter.com
Step 4: Push the Bolt Release Pin
Locate the bolt release pin on the left side of the receiver, just above the trigger guard. Push the pin forward with the tip of a small punch or screwdriver.
Step 5: Withdraw the Bolt
While holding the bolt release pin forward, slowly lower the bolt handle and gently pull the bolt straight back out of the receiver. Do not force the bolt; it should slide out smoothly.
Step 6: Inspect the Bolt and Clean as Needed
Once the bolt is removed, take the opportunity to inspect it for any dirt, debris, or wear. Use a cleaning rod and patches to clean the bolt body, extractor, and ejector. If necessary, apply a small amount of gun oil to lubricate the moving parts.
Step 7: Reassemble the Rifle (Optional)
If you have completed your maintenance or cleaning, you can reassemble the rifle by following the above steps in reverse order. Ensure that the bolt release pin is fully engaged before closing the bolt.
How To Take Bolt Out Of Remington 700
Conclusion
Taking the bolt out of a Remington 700 rifle is a relatively simple process that can be completed by most shooters with basic tools and a little bit of care. By following these steps, you can safely maintain your rifle and keep it in optimal operating condition. Remember to always practice proper firearm safety and refer to your rifle’s user manual for specific instructions if needed.
